The M200 Brushless Motor is a simple motor version of the T200 Thruster.
It uses the same internal components but doesn’t have the plastic nozzle or other components.
Applications
- Waterproof brushless camera gimbals
- Underwater actuators
- Build your own thruster
- Small ROVs that don’t need full size thrusters
Features
- Efficient brushless electric motor
- Standard mounting holes spaced 19mm and 16mm apart
- Rugged design for use in extreme environments
- Operates under extreme pressure and depth
- High-performance plastic bearings that don’t corrode
- Solder pads to connect and seal wires
Resources
Important Notes
It is strongly recommended to insulate the motor. Over time, without insulation, the wires will begin to show signs of corrosion.
Specifications
| Parameter | ||
|---|---|---|
| Operating Voltage | 6-20 Volts | |
| Max Current | 22 Amps | |
| Max Power | 350 Watts | |
| Length | 2.44 in | 62 mm |
| Diameter | 1.42 in | 36 mm |
| Shaft Diameter | 0.197 in | 5.0 mm |
| Mounting Hole Spacing | 0.94 in & 0.75 in | 24 mm & 19 mm |
| Mounting Holes | M3x0.5 Screws | |
| Weight in Air | lb | g |
| Weight in Water | lb | g |
Reviews
There are no reviews yet.