This cable penetrator is a simple solution to waterproofing your robot. It’s basically a bolt with a hole that the thruster cable can be glued into to provide a waterproof connection through water-tight enclosures, boxes, panels, etc.
We recommend Loctite Marine Epoxy and the Potting Kit to complete assembly.
Features
- Anodized aluminum construction for corrosion resistance and high strength
- Captive O-ring face seal that works on any smooth surface
- Wrench flats for easy tightening
- Multiple inner diameters to secure the cable jacket but leave room for potting compound
- Works for cables smaller than 6mm as well
Contents
- 1 x Cable Penetrator Bolt
- 1 x Cable Penetrator Nut
- 1 x O-Ring
Specifications
| Parameter | ||
|---|---|---|
| Recommended through-hole diameter | 10 mm | |
| Bolt Threading | M10 x 1.5 | |
| Bolt Length | 0.98 in | 25 mm |
| Bolt Head / Nut Diameter | 0.71 in | 18 mm |
| Wrench Flats | 0.63 in | 16 mm |
Resources
Be the first to review “Cable Penetrator for 6mm Cable”
You must be logged in to post a review.
Reviews
There are no reviews yet.