L298 Module Red Board (Dual H-bridge motor driver using L298N)

80.00 EGP

L298N Motor Driver Module is a high power motor driver module for driving DC and Stepper Motors. This module consists of an L298 motor driver IC and a 78M05 5V regulator. L298N Module can control up to 4 DC motors, or 2 DC motors with directional and speed control.

Out of stock

Brief About L298N Module

The L298N Motor Driver module consists of an L298 Motor Driver IC, 78M05 Voltage Regulator, resistors, capacitor, Power LED, 5V jumper in an integrated circuit.

78M05 Voltage regulator will be enabled only when the jumper is placed. When the power supply is less than or equal to 12V, then the internal circuitry will be powered by the voltage regulator and the 5V pin can be used as an output pin to power the microcontroller. The jumper should not be placed when the power supply is greater than 12V and separate 5V should be given through 5V terminal to power the internal circuitry.

L298N Motor Driver Module

ENA & ENB pins are speed control pins for Motor A and Motor B while IN1& IN2 and IN3 & IN4 are direction control pins for Motor A and Motor B.

Internal circuit diagram of L298N Motor Driver module is given below:

L298N Motor Driver module Internal Circuit Diagram

L298N Module Pin Configuration:

Pin Name Description
IN1 & IN2 Motor A input pins. Used to control the spinning direction of Motor A
IN3 & IN4 Motor B input pins. Used to control the spinning direction of Motor B
ENA Enables PWM signal for Motor A
ENB Enables PWM signal for Motor B
OUT1 & OUT2 Output pins of Motor A
OUT3 & OUT4 Output pins of Motor B
12V 12V input from DC power Source
5V Supplies power for the switching logic circuitry inside L298N IC
GND Ground pin

L298 Module Features & Specifications:

  • Driver Model: L298N 2A
  • Driver Chip: Double H Bridge L298N
  • Motor Supply Voltage (Maximum): 46V
  • Motor Supply Current (Maximum): 2A
  • Logic Voltage: 5V
  • Driver Voltage: 5-35V
  • Driver Current:2A
  • Logical Current:0-36mA
  • Maximum Power (W): 25W
  • Current Sense for each motor
  • Heatsink for better performance
  • Power-On LED indicator

Alternate Driver Modules: TMC2209, DRV8825, A4988, L9110S, DRV8711

Related Components: LM298 Motor Driver IC, 78M05 Voltage Regulator, Capacitors, Resistors, Heat Sink

Applications of L298N Module

  • Drive DC motors.
  • Drive stepping motors
  • In Robotics

Need Help?

Please get in touch with us through our Contact Us page.

Reviews

There are no reviews yet.

Be the first to review “L298 Module Red Board (Dual H-bridge motor driver using L298N)”

Category: Tags: , ,