Description:

Features:

1.     High power;
2.     Small size;
3.     Low power consumption;
4.     Simple operation;
5.     Dual Driver;
6.     Support independent control for 2 motors;
7.     Support 433MHz remote control(Not included).

Parameters:

1.     Product Name: 5A Dual Motor Drive Module
2.     Product Number: ZK-5AD
3.     Working Voltage: DC 3.0V-14V
4.     Input Signal Voltage:DC 2.2V-6.0V
5.     Drive Current: 5A
6.     Stand-by Current:10uA
7.     Working Temperature range: -20℃~85℃
8.     Working Humidity range: 0%-95%RH
9.     Size:38*27*18mm
10.     Mounting hole diameter:2mm

Conventional control method

1.     The module can control 2 DC motors separately.
2.     D0 and D1 control Motor 1;
3.     D2 and D3 control Motor 2;
4.     High level signal is DC 2.2V-6.0V;
5.     Low level signal is DC 0.0V-0.7V;
6.     D0~D3 can receive the control signal from MCU and other signal sources;
7.     Control logic by Drive Logic Table shown as following in the description picture.

Remote control mode(The Remote control is not included):

1.   It can be controlled by a 433MHz Wireless Remote Control Switch Module. User can connect the output from the 433MHz receiver to the input interface at the motor drive module. But please noted that the 433MHz Wireless Remote Control Switch Module is not included in this package! The user needs to prepare in advance or purchase separately.
2.    Its communication distance will just be about 20~30 meter if the control motor. Due to interference from the motor.
3.  Inching Mode: Motor rotation when press button and stop rotation when release button. Two motor’s work status is independent of each other.
4.  Self-locking Mode: Motor rotation when press button and stop rotation when press button again. Two motor’s work status is independent of each other.
5.  Interlocking Mode: Motor 1 will stop when Motor 2 is working; Motor 2 will stop when Motor 1 is working; Two motor’s work status is not independent.
6.  When changing the direction of rotation of the motor, please be sure to wait for the motor to completely stop, otherwise, the module will be damaged due to excessive current.
7.   For more information please refer to the datasheet about the 433MHz Wireless Remote Control Switch Module.

Note:

1.     When changing the direction of rotation of the motor, please be sure to wait for the motor to completely stop, otherwise, the module will be damaged due to excessive current;
2.     Please don’t short circuit;
3.     Reverse connection protection is not supported;
4.     433MHz Wireless Remote Control Switch Module is not included in this package! User needs to prepare it in advance or purchase separately.

Application:

1.     Wireless remote control car;
2.     Ship model;
3.     Model airplane;
4.     Wireless temperature and humidity detection;
5.     Intelligent data collection;
6.     Motor drive.

Package: