M100 Propeller

16.00 EGP

This 3D printed propeller is designed for the M100 motor and provides 3.2 lb of thrust! Counter-rotating directions available.


The propeller has a 68mm diameter and generates about 3.2 lb of forward thrust and 2.6 lb of reverse thrust. There are clockwise and counter-clockwise rotating versions. Thanks to the magic of 3D printing, we can build these in small batches without the need for expensive injection molded tooling. We are selling the propellers here for your convenience, but many of you have your own 3D printers and can print the propellers yourself. We are making the 3D files for the propeller open-source and licensed under CC-NC-SA 4.0.

Check out the “Resources” tab for performance charts.


  • 1 x Clockwise OR Counterclockwise Propeller
  • 2 x M3x12 propeller screws


The 3D files are available here for free (and also on GrabCAD). The files are licensed under CC-NC-SA 4.0.


Propeller Diameter 2.68 in 68 mm
Pitch (angle) 12.5 deg (at 75% radius)
Pitch (travel) 1.4 in/rev 36 mm/rev

There are no reviews yet.

Be the first to review “M100 Propeller”